Is it cheaper to repair or replace a gate?

Repair is almost always cheaper. A sagging gate usually needs hinge reinforcement or a diagonal brace, not a new gate. Rust on joints can be cut out and welded clean. Full replacement only makes sense when a gate is rusted through multiple structural members or you want a different style anyway.

Do I need to take the gate off its hinges to get it welded?

No. Mobile welding means the gate stays in place. The welder brings truck-mounted MIG/stick equipment, grinder, and clamps, and repairs the gate on-site. Most residential gate repairs finish in a single visit.

What's included in a gate welding quote?

A flat quote typically includes the trip charge, labor, and consumables (welding wire, grinding discs, primer). Larger replacement steel or custom hardware may be itemized separately. Ask for a clear breakdown before work starts so there are no surprises.

Can you weld wrought iron gates?

Yes. Wrought iron and mild steel are the most common residential gate materials and both weld well with standard MIG/stick equipment. Aluminum gates need specialized equipment and aren't a fit for standard mobile welding setups.

How Much Does Gate Welding Cost in Santa Rosa? (2026 Pricing Guide)

Q: How much does gate welding cost in Santa Rosa?

Simple hinge or latch repairs run $100–$200. Full gate realignment with welded reinforcement runs $200–$400. Rust-damaged sections that need cutting out and replacing typically run $150–$350. Custom gate fabrication is quoted per job based on size and materials.

Gate welding in Santa Rosa and Sonoma County costs $100–$400 in 2026: hinge or latch repair runs $100–$200, full gate realignment with welded reinforcement runs $200–$400, and rust-damaged section repair runs $150–$350. Custom gate fabrication is quoted per job based on size, material, and hardware. Pricing is usually flat-fee, so you know the cost before any welding starts.

If you're searching for "gate welding near me" or "gate repair cost" in Santa Rosa, this guide breaks down real 2026 pricing for the most common gate problems — sagging, broken hinges, rust, and full custom builds.

Gate Welding Pricing by Repair Type (2026)

Repair Type	Typical Range
Hinge or latch repair	$100 – $200
Full gate realignment with welded reinforcement	$200 – $400
Rust-damaged section cut-out and weld	$150 – $350
Gate frame straightening	$150 – $350
Decorative/ornamental metalwork repair	Quoted per job
Custom gate fabrication (per opening)	Quoted per job

Trip charges (typically $50–$100) are rolled into the flat quote rather than billed separately. These ranges reflect actual Sonoma County pricing, not national averages.

Close-up of a welded corner joint on a steel gate frame

Welded hinge reinforcement on a steel gate

What Affects Gate Welding Cost

Type of damage

A loose hinge bolt-on repair is quick. A gate that's racked out of square, or has rust eating through a structural member, takes more cutting, fitting, and welding time — the price reflects that.

Material

Wrought iron and mild steel are standard and weld with typical mobile MIG/stick setups. Heavier decorative ironwork or non-standard metals can add time and cost.

Access

A driveway gate with clear truck access is straightforward. A side or garden gate tucked behind landscaping, or a gate that needs to be partially disassembled to reach the damage, takes more time to set up for.

Repair vs. full fabrication

Most gate problems are repairable — reinforcing a hinge, cutting out a rusted section and welding in new steel, or straightening a racked frame costs a fraction of building a new gate. Full custom fabrication (cutting and welding a new frame from square tubing, priming, painting, and hanging it on welded hinges) is priced separately since it's effectively a new build. See a full custom build with photos: Custom Welded Steel Gates in Santa Rosa →

Welded steel gate frame before painting and hanging

How to Get the Best Price

Get a flat quote before work starts. You should know the price before any welding happens — not after.
Send photos ahead of time. A few clear photos of the damage lets the welder scope the job and give a more accurate quote before even arriving.
Don't wait on rust. A small rusted section caught early is a cheap cut-and-weld repair. Left alone, rust spreads and eventually requires more extensive (and pricier) repair.
Bundle with other welding work. If you've also got a fence section, handrail, or another metal repair on the property, doing it in the same visit saves on trip charges.

Get a Quote from Build & Fortify

Build & Fortify provides flat-fee mobile welding throughout Santa Rosa and Sonoma County. The gate stays on-site — no hauling it to a shop, no waiting days for a drop-off repair. Describe the problem (photos help) and get a clear quote before any work starts.